4 teicnící éagsúla le haghaidh greamaithe lionsa aicrileach

First, docking: This is very simple, just put the two pieces of acrylic that need to be connected on the operating platform, and then glue the cloth on the bottom after closing, leaving a very small gap for the docking port, and then inject the adhesive That's it.

Sa dara háit, greamú bevel: Caithfidh an bevel greamaithe múnla uillinn 90 céim a úsáid chun dí-áitiú an dromchla greamaithe a chosc. Cuir an greamachán i bhfeidhm go cothrom agus go mall. Ní féidir an máistirfhoirm a bhaint ach amháin tar éis é a leigheas go hiomlán.

Third, façade sticking: Facade sticking is the most widely used sticking technique. First, the surface to be pasted should be wiped clean. It is best to use the master mold to achieve the paste, so that the paste does not shake, which is conducive to improving the quality of the paste. The plexiglass plate with a thickness of 3mm can be pasted with thin metal wires, which can be pasted by capillary action. The metal wires can be pulled out before the adhesive is cured, or it can be pasted by using adhesive tape and then applying the adhesive. 

Ceathrú, greamú dromchla: is modh greamaithe sách speisialta é greamú eitleáin. Gcéad dul síos, wipe an dromchla a ghreamú glan, é a chur go cothrománach, agus cuir méid cuí greamachán air. Cuir taobh amháin den bhileog aicrileach eile go obliquely i dteagmháil leis an mbileog aicrileach atá brataithe leis an ghreamaitheach, agus ansin é a chur síos go cothrom agus go mall a thiomáint amach na boilgeoga aeir ó thaobh amháin a chur i gcrích an ghreamú. (Nóta: Creimfidh an ghreamaitheach seo aicrileach, mar sin déan bearta cosanta)